What is an EMP Shield?

The EMP Shield is a very robust electrical surge arrestor, designed to exceed the requirements of MIL-STD-188-125-1 for shunting over-voltage spikes to ground and neutral very quickly.EMP Shieldô is the Worldís only tested and approved EMP protection technology for an entire electrical system.Built to exceed military standards (MIL-STD-188-125-1), EMP Shield is also one of the Worldís fastest whole home surge protectors operating in less than 1 billionth of a second.EMP Shield is designed to protect an entire home from Lightning, CME (coronal mass ejection, power surges, and an EMP (electromagnetic pulse). Proven and tested at Keystone Compliance, a Federally approved Department of Defense (DOD) testing facility, Our EMP Shield was struck with over 40x EMP strikes with no impact to the device.MIL-STD-188-125-1 requires that the over-voltage spike from the E1 spike begin shunting 5,000 Amps within 20 nanoseconds. All EMP Shield models start shunting over voltage in less than 10 nanoseconds, while some models are able to begin shunting over voltage in less than 1 nanosecond. The EMP Shields are also designed to continue protecting through the expected durations of the E2 and E3 spikes produced in a HEMP strike.

A nuclear EMP is defined as having 3 distinct pulses of voltage/current. The E1 pulse is caused by the gamma rays released during the nuclear reaction. The Gamma rays interact with the electrons and the nucleus of the atoms that make up the atmosphere, and this interaction results in freeing electrons from their atoms. The free electrons ionize the atmosphere (ionization results in electron flow), which can be seen as the flow of electricity through anything that acts as an antenna. All of the wires that make up our nationsí electrical grid make an excellent antenna, which will produce an over-voltage condition throughout the affected area. For an optimally positioned detonation (approximately 300 miles high and over the center of the US), the entire nation will be affected by the E1 pulse. The E1 pulse starts at the time of the detonation of the weapon and continues until 1 microsecond after the detonation.The E-2 pulse starts at 1 microsecond and continues until approximately 1 second after the detonation. The E-2 pulse is caused by the inelastic scattering (matter bouncing off other matter) of the matter from the nuclear weapon interacting with the matter that makes up the atmosphere continuing to ionize the atmosphere.The E-3 pulse starts at approximately 1 second after the detonation and can continue for several minutes. The E-3 pulse is caused by the nuclear detonation distorting the earthís geomagnetic structure, and then its reconfiguration. As the magnetic lines are pushed out of configuration and then come back into normal configuration, electricity is generated, and flows through the atmosphere until it contacts an antenna (wires).The antenna that is most affected will be the nationís power grid, but all arrays of wiring (even in your house) will act as large or small antennas and will produce the flow of electricity and over-voltage conditions.

Does this EMP Shield device work in every country?

Yes, it does ñ but for people ordering outside the USA they need to email us or put a comment in their order as in what country they are planning to use the device. If the unit for their voltages is not in stock, we can have one ready to ship in 48-72 hours

Will the EMP Shield work on solar power systems?

Yes, however, we will need the operating voltage of your system (like 12v, 24v or 48v). Send us an email or put a comment in your order as to what voltage your system uses for the panels. If the unit for your voltage is not in stock, we can have one ready to ship in 48-72 hours.

Is the EMP Shield hard to install?

No ñ We recommend you have it installed by a licensed electrician and/or used in accordance with electrical codes and regulations. However, it is very simple to install.

Is the EMP Shield attached to my home's breaker box?

We have ways for you to mount the EMP Shield box (6? wide x 2.5? tall x 3.0? deep) on the wall beside your breaker box, inside the breaker box and inside the breaker box with a small LED box just outside the edge of the breaker box so you can see the status of all the lines.

Can we use the EMP Shield on our boats, vehicles, or aircraft?

Yes, you can. You need to email us or put a comment in your order telling what brand, model and operating voltage your boat or aircraft uses.

EMP Shield – Single DC 300-420 Volt Solar / Wind EMP Protection (DC-300-420-W)

Q: How Does EMP Shield Work?

The EMP Shield can see and protect all the electronics and equipment connected to your electrical system.This is accomplished by shunting (shorting) the over voltage coming in from the Grid and the voltage surges that are collected within your home.Whether the electrons are collected within your home or are attempting to come into your electrical system from outside the home (the grid), the EMP Shield will see the surge and protect your electrical system. The EMP Shield reacts in less than 1 billionth of a second. Since the shunting is completed incredibly fast, the over voltage is drained away from the equipment before the voltage can rise high enough to damage any equipment. We call this new technology SightSpeedô

Dual DC 300 - 420 Wired EMP Shield Solar and Wind

Next Generation EMP Protection With Military Certified Testing.

Listed by the Department of Homeland Security.

Rated 4.00 out of 5 based on 1 customer rating

(1 customer review)

$349.00

EMP Protection

All Phases an EMP (E1, E2, & E3)

Lightning Protection

100% Guaranteed & Backed By a $25,000 Insurance Policy

Solar Flares

Up to 228,000 Amps

Industry Leading 10 Year Warranty

If it fails at anytime during the 10 year warranty, we replace it for $50. No questions asked!

Backed by $25,000 of Insurance

If the device doesn’t protect your electronics, we will cover the damage

Surpasses All Military EMP Testing Standards

MIL-STD-188-125-1,MIL-STD-464C, MIL-STD-461-G, RS-105 (90,000 Volts)

Easily Installs in 10 Minutes or Less

We have designed the EMP Shield to install easy for any application. All devices have easy step by step instructions

Installation Instructions

Download Instructions

Listed by the Department of Homeland Security

EMP Shield Has Set New Standards in EMP Protection and is Listed in Homeland Securities EMP Resilience Report

IP 66 Rated

For Use in Extreme Hot & Cold Climate Conditions

One of the Worlds Fastest

Our Technology Pulls Excess Electricty in 500 Trillionths of a Second

Incredibly Powerful

The EMP Shield is Capable of Withstanding over 200,000 AMPS

UL 1449 Compliant

Our Devices Have Been Lightning Tested to Some of the Highest UL1449 Standards

14 Day Money Back Guarantee

If You Decide EMP Shield Isn’t For You, We Offer a 14 Day No Questions Asked Return Policy

Why Do I Need EMP Shield?

The Government has released an EMP Executive order & Homeland Security is urging people to get prepared quickly!
Although the grid may be down, your electrical equipment and home will still be functional.
EMP Shield will ensure your vehicle operates after an EMP helping you get home, save family members, or even get supplies while others cannot.
Your home will be 100% protected from lightning saving you thousands of dollars and months of time if you are hit with lightning.
If you have a solar system or generator, you will have power and functional equipment while others do not!

How Has This Been Tested?

Isn’t a nuclear explosion required to create an EMP?

Learn More

The threat of an EMP is the large amount of electricity that is induced into conductors that generate heat and can be destroyed. There are only a few testing facilities in the world capable of producing the same amount of electricity that an EMP produces.

EMP Shield has been rigorously tested at the Keystone compliance facility which is a federally approved testing facility that is used to conduct many of today’s most advanced and rigorous technological tests. Out testing and evaluations conducted at the facility were documented in depth to show the true ability and durability of the EMP Shield. Below you will find the complete Keystone Compliance testing results of the EMP Shield.

How Does EMP Shield Work?

EMP Shield will protect all the electronics and equipment connected to your electrical system.

This is accomplished by shunting (shorting) the over voltage coming in from the grid and the voltage surges that are collected within your home.

Whether the source of electrons are from within your home or coming into your electrical system from outside the home (the grid), the Shield will see the surge and protect your electrical system. Our technology reacts in less than 1 billionth of a second. Since the shunting is completed incredibly fast, the over voltage is drained away from the equipment before the voltage can rise high enough to damage any equipment. We call this new technology SightSpeed™

1 review for EMP Shield - Single DC 300-420 Volt Solar / Wind EMP Protection (DC-300-420-W)

Rated 4 out of 5
Kemp (verified owner) – September 24, 2019
Verified review - view original
need more
Was this review helpful to you?
Yes
No

Only logged in customers who have purchased this product may leave a review.