Inergy Flex EMP Shield Protection Modules
EMP Shield’s AC and DC Power Protection Modules are the first EMP protection devices built to protect the entire Flex Power Station (not compatible with any other power stations). The EMP Shield is the only device that offers protection while in use without requiring awkward or bulky Faraday cages or bags.
In the case of a solar flare, lightning strike, EMP or other electrical event your Flex inverter, charger controller, battery, AC power circuits and DC power circuits (along with every device plugged into the DC output ports and the AC protection module) will be protected.
Listed by the Department of Homeland Security.
Original price was: $859.99.$759.99Current price is: $759.99.
This device will protect all the electronics and equipment connected to it.
This is accomplished by shunting (shorting) the overvoltage coming in from an EMP event. The DC EMP Shield plugs into the EC8 solar input, between the Flex and your solar panels. The Flex EMP Shield is built for PV arrays with a max VOC (voltage-open circuit) of up to 90V. Make sure the maximum VOC of your array is within this range to ensure your EMP Shield protects your DC circuits. The AC EMP Shield attaches to one of 6 AC ports on your Flex 1500 Power Station. Again, only devices plugged directly into the AC EMP module will be protected.
Regardless of the source of electrons in an EMP event, the Shield will see the surge and protect your Flex 1500 Power Station. EMP Shield’s technology reacts in less than 1 billionth of a second. Since the shunting is completed incredibly fast, the overvoltage is drained away from the equipment before the voltage can rise high enough to damage any equipment.
EMP Protection
Solar Flares
Lightning Protection
Featured In
Coolest Thing Made in Kansas Winner!
EMP Shield beat Garmin to be selected officially as the coolest thing made in Kansas.
Inergy Flex EMP Shield Protection Modules
Original price was: $859.99.$759.99Current price is: $759.99.
Industry Leading 10 Year Warranty
If it fails at anytime during the 10 year limited lifetime warranty, we replace it for $50. No questions asked!
Backed by $25,000 of Insurance
If the device doesn’t protect your electronics, we will cover the damage
Surpasses All Military EMP Testing Standards
- MIL-STD-188-125-1
- MIL-STD-464C
- MIL-STD-461-G
- RS-105 (90,000 Volts)
Listed by the Department of Homeland Security
One of the Worlds Fastest
Our Technology Begins Pulling Excess Electricity from Your Homes Electrical System in 500 Trillionths of a Second
14 Day Money Back Guarantee
Incredibly Powerful
The EMP Shield is Capable of Withstanding up to 228,000 AMPS per phase.
IP 66 Rated
For Use in Extreme Hot & Cold Climate Conditions. Extreme weather proven at Edison Testing Laboratories.
Easily Installs in 10 Minutes or Less
We have designed the EMP Shield to install easily for any application. All devices have an easy to follow installation guide.
Why Do I Need EMP Shield?
- The Government has released an EMP Executive order & Homeland Security is urging people to get prepared quickly!
- Although the grid may be down, your electrical equipment and home will still be functional if you have EMP Shield.
- EMP Shield will ensure your vehicle operates after an EMP helping you get home, save family members, or even get supplies while others cannot.
- Your home will be 100% protected from lightning saving you thousands of dollars and months of time if you are hit with lightning.
- If you have a solar system or generator, you will have power and functional equipment while others do not!
How Has This Been Tested?
Isn’t a nuclear explosion required to create an EMP?
How Has EMP Shield Been Tested?
Isn't a nuclear explosion required to create an EMP?
The threat of an EMP is the large amount of electricity that is induced into conductors that generate heat and can be destroyed. There are only a few testing facilities in the world capable of producing the same amount of electricity that an EMP produces.
EMP Shield has been designed to exceed the US Military requirements for protection against a high-altitude nuclear detonation that results in an electromagnetic pulse. This family of products has been tested to verify compliance with the following Military Standards:
MIL-STD-461-RS105 Transient electromagnetic pulse of up to 50 kV/m, double exponential wave with a rise time in the nanosecond range, that is applied to the equipment under test (EUT) at least 5 times. We tested at 50 kV/m and also 90 kV/m (80% above required testing voltage).
MIL-STD-188-125-1 High Altitude EMP
MIL-STD-461G Control of Electromagnetic Interference
MIL-STD-461-CS-115 The purpose of CS115 is to test an electronic or electrical system to withstand signals coupled onto the test unit’s associated cabling. The test unit will be subjected to rise and fall times, pulse width, and amplitude as specified on Figure CS115-1 at a 30 Hz rate for one minute;
MIL-STD-461-CS116 applies to 10 kHz to 100 MHz for all interconnecting cables, including power cables, and individual high side power leads;
MIL-STD-461 CS117 apples to all safety-critical equipment interconnecting cables and non-safety critical equipment with interconnecting cables/electrical interfaces that are part of or connected to equipment performing safety critical functions. The goal is to test the unit’s ability to withstand lightning transients coupled onto the test unit’s associated cables and power leads;
MIL-STD-464C Electromagnetic Environmental Effects Requirements for Systems.
Our test results show that we begin shunting the over-voltage condition in less than 1 nanosecond, and our units are designed to shunt over 100,000 Amps per phase. Our devices are scalable to any size.
*Keystone Compliance does not personally endorse any products
How Does EMP Shield Work?
EMP Shield will protect all the electronics and equipment connected to your electrical system.
This is accomplished by shunting (shorting) the over voltage coming in from the grid and the induced voltage that is collected within your home.
Whether the source of electrons are from within your home or coming into your electrical system from outside the home (the grid), the Shield will see the surge and protect your electrical system. Our technology reacts in less than 1 billionth of a second. Since the shunting is completed incredibly fast, the over voltage is drained away from the equipment before the voltage can rise high enough to damage any equipment. We call this new technology SightSpeed™
