Whole Home Generator EMP Shielding & Lightning Protection (SP-120-240-G)
• EMP Shield is Listed by the Department of Homeland Security.
• Next Generation Protection Against High Altitude Nuclear Electromagnetic Pulse (HEMP), CME, Solar Flare, and Lightning — Backed by Certified Military EMP Testing.
• Proudly Made in America, Veteran Owned Company.
• EMP Shield protects over $9 Billion in infrastructure, equipment, & vehicles. We have manufactured 250,000+ EMP Shield products at our Kansas facilities.
Original price was: $489.00.$379.00Current price is: $379.00.
What Does EMP Shield Protect Against?
EMP Protection
All Phases of an EMP (E1, E2, E3)
Coronal Mass Ejection (CME) & Solar Flare
Up to 228,000 Amps
Lightning Protection
100% Lightning Guarantee Backed By a $25,000 Insurance Policy
Some Organizations We Work With
DHS
United States Department of Homeland Security
U.S. AIRFORCE
United States Airforce
FBI
Federal Bureau of Investigation
Featured In
Whole Home Generator EMP Shielding & Lightning Protection (SP-120-240-G)
Original price was: $489.00.$379.00Current price is: $379.00.
Industry Leading 10 Year Warranty
If it fails at anytime during the 10 year warranty, we replace it for $50. No questions asked!
Backed by $25,000 of Insurance
Surpasses All Military EMP Testing Standards
Easily Installs in 10 Minutes or Less
We have designed the EMP Shield to install easily into any vehicle. Check out our video below to see how simple installation is!
Learn More About Our Products
Listed by the Department of Homeland Security
IP 66 Rated
For Use in Extreme Hot & Cold Climate Conditions
One of the Worlds Fastest
Our Technology Begins Pulling Excess Electricity from Your Electrical System in Less Than a Nanosecond
Incredibly Powerful
UL 1449 Compliant
Our Devices Have Been Tested to Some of the Highest UL 1449 Standards
14 Day Money Back Guarantee
If You Decide EMP Shield Isn’t For You, We Offer a 14 Day No Questions Asked Return Policy
Why Do I Need EMP Shield?
- The Government has released an EMP Executive order & Homeland Security is urging people to get prepared quickly!
- Although the grid may be down, your electrical equipment and home will still be functional if you have EMP Shield.
- EMP Shield will ensure your vehicle operates after an EMP helping you get home, save family members, or even get supplies while others cannot.
- Your home will be 100% protected from lightning saving you thousands of dollars and months of time if you are hit with lightning.
- If you have a solar system or generator, you will have power and functional equipment while others do not!
NEW! EMP Shield MICRO (Vehicle Protection) – LEARN MORE
Protecting the Rezvani Tank
Our technology is now protecting the Rezvani Tank and other venicles just like it.
Coolest Thing Made in Kansas Winner!
EMP Shield beat Garmin to be selected officially as the coolest thing made in Kansas.
Leap Awards Winner!
EMP Shield’s Internet Series was awarded a Bronze LEAP Award in the Connectivity category
We’re a Proud Company in the Heartland of America
EMP Shield is 100% American Made and Veteran Owned.
All of our products are made right here in Kansas, USA!
EMP Shield currently has over 70 Kansas employees and 3,000+ affiliates nation wide.
Industry Leading Products and Customer Service
No robots or AI. Give us a call and our sales team will be happy to assist!
How Has EMP Shield Been Tested?
Isn’t a nuclear explosion required to create an EMP?
The threat of an EMP is the large amount of electricity that is induced into conductors that generate heat and can be destroyed. There are only a few testing facilities in the world capable of producing the same amount of electricity that an EMP produces.
EMP Shield has been designed to exceed the US Military requirements for protection against a high-altitude nuclear detonation that results in an electromagnetic pulse. This family of products has been tested to verify compliance with the following Military Standards:
MIL-STD-461-RS105 Transient electromagnetic pulse of up to 50 kV/m, double exponential wave with a rise time in the nanosecond range, that is applied to the equipment under test (EUT) at least 5 times. We tested at 50 kV/m and also 90 kV/m (80% above required testing voltage).
MIL-STD-188-125-1 High Altitude EMP
MIL-STD-461G Control of Electromagnetic Interference
MIL-STD-461-CS-115 The purpose of CS115 is to test an electronic or electrical system to withstand signals coupled onto the test unit’s associated cabling. The test unit will be subjected to rise and fall times, pulse width, and amplitude as specified on Figure CS115-1 at a 30 Hz rate for one minute;
MIL-STD-461-CS116 applies to 10 kHz to 100 MHz for all interconnecting cables, including power cables, and individual high side power leads;
MIL-STD-461 CS117 apples to all safety-critical equipment interconnecting cables and non-safety critical equipment with interconnecting cables/electrical interfaces that are part of or connected to equipment performing safety critical functions. The goal is to test the unit’s ability to withstand lightning transients coupled onto the test unit’s associated cables and power leads;
MIL-STD-464C Electromagnetic Environmental Effects Requirements for Systems.
Our test results show that we begin shunting the over-voltage condition in less than 1 nanosecond, and our units are designed to shunt over 100,000 Amps per phase. Our devices are scalable to any size.
*Keystone Compliance does not personally endorse any products
How Does EMP Shield Work?
EMP Shield will protect all the electronics and equipment connected to your electrical system.
This is accomplished by shunting (shorting) the over voltage coming in from the grid and the induced voltage that is collected within your home.
Whether the source of electrons are from within your home or coming into your electrical system from outside the home (the grid), the Shield will see the surge and protect your electrical system. Our technology reacts in less than 1 billionth of a second. Since the shunting is completed incredibly fast, the over voltage is drained away from the equipment before the voltage can rise high enough to damage any equipment. We call this new technology SightSpeed™
350 reviews for Whole Home Generator EMP Shielding & Lightning Protection (SP-120-240-G)
Only logged in customers who have purchased this product may leave a review.
Jim Wise (verified owner) –
Received the home generator devise in good physical condition no visible shipping damage. Not installed yet.
Ed (verified owner) –
Service could not have been better! Looking forward to the added protection of our assets.
Brian L. (verified owner) –
they are very well built easy to install
Anonymous (verified owner) –
Ordering was easy and delivery was fast!
Joel (verified owner) –
Tremendous quality, and an essential device for all households and automobiles. The specifications and testing required to deliver the response. speed at which the device must operate is essential to its utility and performance. EMP Shield has the superior product in this sector.
Lorrie T. (verified owner) –
My electrician just installed and said I am good to go! I feel so much more secure knowing my home and generac are protected!!!🤗
George Demchak (verified owner) –
The interaction was pleasant and courteous to the point of allowing me to share war stories about installing my solar system.
Brandon H. (verified owner) –
Great product
Allyn Cavoto (verified owner) –
The staff is super helpful and very knowledgeable!!!
Mazen (verified owner) –
Piece of mind knowing my generator won’t be affected by a lightning strike or EMP
Anonymous (verified owner) –
Great product
Ben D. (verified owner) –
Ordering was a pleasure. YouTube videos were very helpful.
Patti S. (verified owner) –
Shipped quicker than expected.
Anthony Ash (verified owner) –
Easy to deal with answered all questions
Marcus (verified owner) –
I received my EMP Home & my EMP Generator products within a week. They came packaged well with instructions for installation. I Installed them within an hour. I plan on buying several more for my other vehicles. It feels good to know I have EMP protection. Thank you!
Anonymous (verified owner) –
Just a little insurance policy. Hope it’s never needed, but cheaper than repairs if it is.
Dan Mason (verified owner) –
Received quickly, well packaged, great support from staff. Looking forward to installing and getting protection up and running. Thanks guys and gals!
Joe (verified owner) –
Most US military bases have now completed off grid backup power support, only makes sense to try to protect the device we may come to depend on for various power outages.
Anonymous (verified owner) –
Great Service
Michael P. (verified owner) –
So Glad I found EMP Shield!! Thank you Erica!! She was so knowledgeable and helpful!!